Spectrum Analysis (All Vibrex 2000 Units) - Honeywell Vibrex 2000 User Manual

Chapter 5 – General Operation
5.8
After any type of balance operation, if the user feels additional
vibrations, the user can use the Spectrum Analysis feature of the
Vibrex 2000, Vibrex 2000 Plus or Enhanced Vibrex 2000 Plus to
determine the probable source of the vibration. This feature
allows the user to collect extensive, detailed spectral data.
5.8.1
Access and set up this feature, as follows:
1. From the Main Menu screen, press the
ANALYSIS
This action displays the Spectrum Setup screen (see example
below).
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
NOTE: Up to 8 moveline check runs are allowed to be
saved. Once this buffer is full it must be cleared using
the CLEAR option by pressing inside of the top menu
Review function.
Spectrum Analysis (All Vibrex
2000 units)
Spectrum Analysis Setup
context key.
SPECTRUM
13841 Rev A
190