Propeller Balance Setup - Honeywell Vibrex 2000 User Manual

5.4.1
To begin a propeller balance operation, press the context key
next to the Main Menu screen option PROPELLER BALANCE.
The Vibrex 2000 and Vibrex 2000 Plus display the first of two
Propeller Balance Setup screens. This set of screens allows the
user to enter basic balance setup information.
5.4.1.1
The Vibrex unit asks for an aircraft tail number or serial number
(aircraft ID). The user may use both alpha and numeric keys for
this data entry, as well as the available punctuation keys. The
user may use up to six characters for this entry.
Enter this information in the Vibrex 2000, using the first
Propeller Balance Setup screen, as shown below.
?
► AIRCRAFT ID[
► PROP ch<1A>
► REAR ch<NONE>
Enter (or edit) the aircraft ID, as follows:
1. Press the
label.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.

Propeller Balance Setup

Entering Aircraft IDs
PROPELLER BAL SETUP
ENG[ 1 ]
if ok, push START
AIRCRAFT ID
Chapter 5 – General Operation
]
context key, next to the AIRCRAFT ID
13841 Rev A
99
SELECT TO ENTER
AIRCRAFT, ENGINE
ID NUMBER
SELECT TO ENTER
PROPELLER
CHANNEL NUMBER
SELECT TO ENTER
REAR CHANNEL
NUMBER