Helicopter Balancing - Honeywell Vibrex 2000 User Manual

Chapter 5 – General Operation
5.6.2
A normal balance session is shown in the following menus:
1. Press the main menu
the proper helicopter model is selected on the second context
button inside the angle brackets "< >" on the next screen. If
not, press the second context button repeatedly to find the
correct model.



2. Use the following screen to select the balance component,
flight regime and change. Note that the balance measurement
sensor and input channel will be selected on the next screen.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.

Helicopter Balancing

? C H O O S E A / C M O D E L
► < A - 1 0 9 E P o w e r
► A D D A I R C R A F T M O D E L
► E D I T A I R C R A F T M O D E L
i f o k , p u s h S T A R T
If your model is not in the user list, then press the
AIRCRAFT MODEL
instructions in paragraph 5.6.1 to add a factory model to
the user list.
Use the
EDIT AIRCRAFT MODEL
the model name or included balance charts. See
paragraph 5.6.5.
Press the
START
Helicopter Balance
key and proceed with the
key when the proper model is selected.
13841 Rev A
164
key. Make sure
>
ADD
context key to edit