Honeywell Vibrex 2000 User Manual page 51

For example, selecting configuration 1A means the Vibrex unit
is using channels No. 1 and A. The channel names shown in the
previous table represent the following values:

Numbers refer to the Velocimeter (vibration) transducer
channel(s) the Vibrex unit is using and show values in IPS.

Letters refer to the photocell or magnetic pickup (azimuth)
channel(s) being used and show values in RPM.
Choosing a Channel Entry -
press the context key next to the screen display line that contains
the angle brackets, until the desired channel entry displays.
Additional Channels on Enhanced Vibrex 2000 Plus – this
unit also allows the selection of two additional channels using
optional multi-channel adaptor cable (part number 902-18701-
X). The table below shows the Enhanced Vibrex 2000 Plus units'
channel configuration choices.
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
Velocimeter No. 1
Velocimeter No. 2
Velocimeter No. 1
(902-18701-1)
Velocimeter No. 2
(902-18701-1)
Velocimeter No. 3
(902-18701-2)
Chapter 3 – Getting Started
1A
2A
As many times as necessary,
RPM A
1A
2A
3A
13841 Rev A
35
1B
2B
RPM B
1B
2B
3B