Chapter 5 – General Operation
1. From the PROPELLER BALANCE SETUP menu, press
START
2. When finished editing as in paragraph 5.4.1.4, press
to advance to the PROP CONFIG 2 OF 2 menu. From
there, the edited configuration can either be saved under a
new name or removed. Note that the factory default
horsepower configurations cannot be removed.
3. From the
editing keys to save the configuration under any desired
name.
Alternate path for saving corrected configurations
Sometimes the user may want to save the auto-corrected
configurations if they were effective. This alternate path allows a
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
and press the
CHG/ADD PROP CONFIG
?
C H O O S E P R O P C O N F I G
► < C u r r e n t c o n f g n a m e >
4 0 . 0 0 G / I P S @ 1 2 : 0 0
► C H G / A D D P R O P C O N F I G
► A U T O C O R R E C T I O N < O N >
i f o k , p u s h S T A R T
?
P R O P C O N F I G 2 o f 2
► S A V E C O N F I G A S
[ C u r r e n t c o n f g n a m e ]
► R E M O V E C O N F I G
i f o k , p u s h S T A R T
SAVE CONFIG AS
13841 Rev A
key the user can use the text
108
key.
START
–