Reviewing Propeller Balance Measurements - Honeywell Vibrex 2000 User Manual

Chapter 5 – General Operation
Enhanced Vibrex 2000 Plus (Heli and Fixed Wing)
= = = = = = R E V I E W = = = = = = =
► T Y P E < l o g t y p e l i s t >
► R E V I E W
► C L E A R
Read this screen, as follows:

TYPE selects the type of log to review: Spectrums, Prop
Runs, Bal Meas, Helicptr Runs (EV2K+ Heli Only), Fixed
Wing Runs (EV2K+ FW Only), Moveline Runs (EV2K+
FW Only).

REVIEW: The number before the slash mark (/) for each
category of measurement represents the number of histories
stored for the current run. The number displayed after the
slash mark represents the total number of readings stored for
each category of measurement.
NOTE: The number of logs available for review depends
on the type of log file.

CLEAR permanently erases all the logs of the selected type
from memory. A prompt screen will confirm this operation.
NOTE: The Clear function under the main Review menu is
the only place available to globally clear the run histories.
5.4.5.1
Review propeller balance measurements, as follows:
1. From the Review Menu screen, press
following information displays:
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
1 / 1 0
Reviewing Propeller Balance
Measurements
13841 Rev A
PROP RUNS
126
. The