Helicopter Balance Run Print, Review And Clearing - Honeywell Vibrex 2000 User Manual

5.6.6
Press the PRINT hard key to print the runs. Printing is as
described in 3.3.2, "Printing With a PC". The
active at only at certain points within the Helicopter Balance
menus where it makes sense to print.
HELPFUL HINT 1: Printing multiple runs is easier with
the "global print" option from the main menu. Use the
following shortcut:


HELPFUL HINT 2: To print a single run, press
hard key, navigate to the proper run, then press the
hard key.
Press the
runs on the screen. If you are using a "global review" from the
main menu, you will also be allowed to clear out previous runs.
The
CLEAR
individual runs.
Each helicopter run consists of a lot of information: Job and run
number, aircraft model, component, measurements, adjustments,
options, etc. This is difficult to fit on the small Vibrex 2000
screens – if you have a choice, it is preferable to print these runs.
This first review screen is shown below:
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
changes will be lost.
Helicopter Balance Run Print,
Review and Clearing
Press the
SPACE
a field.
Press the
PRINT
global print menu.
hard key to review the current or previous
REVIEW
key can only be used to clear all runs and not
Chapter 5 – General Operation
hard key anytime you are not editing
hard key – you will be taken to the
13841 Rev A
185
key is
PRINT
REVIEW
PRINT