Removing Nvdimm-N Battery From The Bracket - Dell EMC PowerEdge R740 Installation And Service Manual

Figure 43. Installing NVDIMM-N battery into mid drive tray
Next step
Follow the procedure listed in

Removing NVDIMM-N battery from the bracket

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
CAUTION: NVDIMM-N battery is not hot swappable. To prevent data loss and potential damage to your system, ensure that your
system, LEDs on system, LEDs on NVDIMM-N and LEDs on NVDIMM-N battery are turned off before removing the NVDIMM-N
battery.
CAUTION: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a
battery.
Step
Press the release tab and slide out the NVDIMM-N battery to disengage the tab on the battery from the slot on the bracket.
90 Installing and removing system components
After working inside your system.
Safety instructions.
Before working inside your system.