Installing Riser 2 And 3 Blank - Dell EMC PowerEdge R740 Installation And Service Manual
Hide thumbs
Also See for PowerEdge R740:
- Technical manual (80 pages) ,
- Installation and service manual (182 pages) ,
- Technical manual (52 pages)
Advertisement
Figure 75. Removing riser 2 and 3 blank
Next step
Install the riser 2 and 3 blank.
Installing riser 2 and 3 blank
Prerequisite
Follow the safety guidelines listed in
Steps
1
Align the screw and guide rail on the riser blank with the screw hole and standoff on the system.
2
Lower the blank into the system until the release tab clicks into place.
3
Tighten the screws to secure the riser blank to the system.
126
Installing and removing system components
Safety
instructions.
Advertisement
