Dell EMC PowerEdge R740 Installation And Service Manual page 139

Figure 91. Removing the top cover of the shroud
10 If applicable, remove the shroud filler from the GPU air shroud slots.
NOTE: Shroud fillers are available in the GPU air shroud for GPUs installed on riser 2 and
3.
Figure 92. Removing the shroud filler from GPU air shroud slots
NOTE: Shroud fillers are available in the GPU air shroud for GPUs installed only on risers 2 and
3.
NOTE: Ensure that the PCIe card holder latches on GPU air shroud and risers are closed before installing the GPU. Full-
length GPU do not require the PCIe card holder latch on the risers to secure the GPU in place.
Installing and removing system components 139