Installing Nvdimm-N Battery Into The Bracket - Dell EMC PowerEdge R740 Installation And Service Manual

Figure 44. Removing NVDIMM-N battery from the bracket
Next step
Install NVDIMM-N battery into the

Installing NVDIMM-N battery into the bracket

Prerequisites
Follow the safety guidelines listed in
CAUTION: NVDIMM-N battery is not hot swappable. To prevent data loss and potential damage to your system, ensure that your
system, LEDs on system, LEDs on NVDIMM-N and LEDs on NVDIMM-N battery are turned off before installing the NVDIMM-N
battery.
CAUTION: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a
battery.
Steps
1 Align the tab on the NVDIMM-N battery with the slot on the bracket.
2 Insert the battery into the bracket until it is firmly seated.
bracket..
Safety instructions.
Installing and removing system components 91