Installing The System Cover - Dell EMC PowerEdge R740 Installation And Service Manual
Hide thumbs
Also See for PowerEdge R740:
- Technical manual (80 pages) ,
- Installation and service manual (182 pages) ,
- Technical manual (52 pages)
Advertisement
Figure 26. Removing the system cover
Next step
Install the system
cover.
Installing the system cover
Prerequisites
1
Follow the safety guidelines listed in
2
Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system.
Steps
1
Align the tabs on the system cover with the guide slots on the system.
2
Push the system cover latch down.
The system cover slides forward, the tabs on the system cover engage with the guide slots on the system and the system cover latch
locks into place.
3
Using a 1/4 inch flat head or Phillips #2 screwdriver, rotate the latch release lock clockwise to the locked position.
Safety
instructions.
Installing and removing system components
73
Advertisement
