Nvdimm-N Battery; Removing The Nvdimm-N Battery - Dell EMC PowerEdge R940xa Installation And Service Manual
Hide thumbs
Also See for PowerEdge R940xa:
- User manual (56 pages) ,
- Processor upgrade tech sheet (24 pages)
Table of Contents
Advertisement
Figure 52. Installing the air shroud C
Next steps
1.
Replace the air shroud B
2.
Replace the NVDIMM-N
3.
Replace the air shroud A
4.
Replace the support bar
5. Follow the procedure listed in
NVDIMM-N battery
This section contains information about the removal and installation of the NVDIMM battery from the air shroud. NVDIMM-N battery is
installed on the air shroud.
Removing the NVDIMM-N battery
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
CAUTION:
NVDIMM-N battery is not hot swappable. To prevent data loss and potential damage to your system,
ensure that your system, LEDs on system, LEDs on NVDIMM-N and LEDs on NVDIMM-N battery are turned off
before removing the NVDIMM-N battery.
CAUTION:
To avoid damage to the battery connector, you must firmly support the connector while installing or
removing a battery.
3.
Remove the support
bar.
4.
Remove the air shroud
76
Installing and removing system components
battery.
After working inside your
Safety
instructions.
Before working inside your
A.
system.
system.
Advertisement
Table of Contents
