Removing A 3.5 Inch Adapter From A 3.5 Inch Drive Carrier - Dell EMC PowerEdge R740 Installation And Service Manual

Figure 51. Installing a 2.5 inch drive into the 3.5 inch drive adapter
Next steps
1 Install a 3.5 inch adapter into the 3.5 inch drive
2 Follow the procedure listed in

Removing a 3.5 inch adapter from a 3.5 inch drive carrier

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove the 3.5 inch drive carrier from the
Steps
1 Remove the screws from the rails on the drive carrier.
2 Lift the 3.5 inch drive adapter out of the drive carrier.
carrier.
After working inside your system.
Safety instructions.
Before working inside your
system.
system.
Installing and removing system components 97