Right Control Panel View - Dell EMC PowerEdge R740 Installation And Service Manual

iDRAC Quick Sync 2 indicator
code
Solid white
Blinks white rapidly
Blinks white slowly
Blinks white five times rapidly and
then turns off
Solid amber
Blinking amber

Right control panel view

Figure 8. Right control panel view
Table 8. Right control panel features
Item Indicator, button, or
connector
1 Power button
Condition
Sync 2 button to turn on the iDRAC Quick
Sync 2 feature.
Indicates that iDRAC Quick Sync 2 is ready
to communicate. Press the iDRAC Quick
Sync 2 button to turn off.
Indicates data transfer activity.
Indicates that firmware update is in
progress.
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Indicates that the system is in fail-safe
mode.
Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Icon
Corrective action
If the LED fails to turn off, restart the system. If the
problem persists, see
If the indicator continues to blink indefinitely, see
Getting help.
If the indicator continues to blink indefinitely, see
Getting help.
Check if iDRAC Quick Sync 2 feature is configured to
be disabled by iDRAC. If the problem persists, see the
Getting help
Integrated Dell Remote Access Controller User's
Guide at Dell.com/poweredgemanuals
OpenManage Server Administrator User's Guide at
Dell.com/openmanagemanuals
Administrator.
Restart the system. If the problem persists, see
Getting help.
Restart the system. If the problem persists, see
Getting help.
Description
Indicates if the system is turned on or off. Press the power button to
manually turn on or off the system.
PowerEdge R740 system overview
Getting help.
section. For more information, see
or Dell
> OpenManage Server
15