Restoring The Service Tag By Using The Easy Restore Feature; Mini Perc Battery; Removing Mini Perc Battery - Dell EMC DSS 9600 Installation And Service Manual

Restoring the Service Tag by using the Easy Restore feature

By using the Easy Restore feature, you can restore your Service Tag, license, UEFI configuration, and the system configuration data after
replacing the server board. All data is automatically backed up in a backup flash device rSPI card automatically. If BIOS detects a new server
board and the Service Tag in the backup flash device rSPI card, BIOS prompts the user to restore the backup information.
1 Turn on the system.
If BIOS detects a new server board, and if the Service Tag is present in the backup flash device rSPI card, BIOS displays the Service
Tag, the status of the license, and the UEFI Diagnostics version.
2 Perform one of the following steps:
• Press Y to restore the Service Tag, license, and diagnostics information.
• Press N to navigate to the Dell Lifecycle Controller based restore options.
• Press F10 to restore data from a previously created Hardware Server Profile.
After the restore process is complete, BIOS prompts to restore the system configuration data.
3 Perform one of the following steps:
• Press Y to restore the Service Tag, license, and diagnostics information.
After the restore process is complete, BIOS prompts to restore the system configuration data.
4 Perform one of the following steps:
• Press Y to restore the system configuration data.
• Press N to use the default configuration settings.
After the restore process is complete, the system restarts.

Mini PERC battery

Removing Mini PERC battery

1 Follow the safety guidelines listed in the Safety instructions section.
2 Complete the procedure listed in Before working inside your system.
1 Disconnect the Mini PERC and PERC battery cables.
2 Press the release latch to release the Mini PERC battery.
3 Slide the Mini PERC battery out of the air shroud to remove.
94 Installing and removing server components