Dell EMC PowerEdge R740 Installation And Service Manual page 113
Hide thumbs
Also See for PowerEdge R740:
- Technical manual (80 pages) ,
- Installation and service manual (182 pages) ,
- Technical manual (52 pages)
Advertisement
Figure 62. Applying thermal grease on top of the processor
5
Place the heat sink on the processor and push down on the base of the heat sink until the bracket locks onto the heat sink.
NOTE:
•
Ensure that the two guide pin holes on the bracket match the guide holes on the heat sink.
•
Do not press on the heat sink fins.
•
Ensure that the pin 1 indicator on the heat sink is aligned with the pin 1 indicator on the bracket before placing the heat sink
onto the processor and bracket.
Installing and removing system components
113
Advertisement
