Removing Expansion Card Riser 1 - Dell EMC PowerEdge R740 Installation And Service Manual

Figure 78. Installing riser 3 blank
Next step
Follow the procedure listed in

Removing expansion card riser 1

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 If installed, remove the expansion cards from the
4 Disconnect any cables connected to the riser.
Step
Press the release latches, and lift the riser from the riser connector on the system board.
After working inside your system.
Safety instructions.
Before working inside your
riser.
system.
Installing and removing system components 129