Installing Optional Idsdm Or Vflash Card - Dell EMC PowerEdge R740 Installation And Service Manual
Hide thumbs
Also See for PowerEdge R740:
- Technical manual (80 pages) ,
- Installation and service manual (182 pages) ,
- Technical manual (52 pages)
Advertisement
Figure 101. Removing the optional IDSDM/vFlash card
NOTE:
There are two dip switches on the IDSDM/vFlash card for write-protection.
Next step
Install the optional IDSDM/vFlash card.
Installing optional IDSDM or vFlash card
Prerequisite
Follow the safety guidelines listed in
Steps
1
Locate the IDSDM/vFlash connector on the system board.
To locate IDSDM/vFlash connector, see the
2
Align the IDSDM/vFlash card with the connector on the system board.
3
Push the IDSDM/vFlash card until it is firmly seated on the system board.
148
Installing and removing system components
Safety
instructions.
System board jumpers and connectors
section.
Advertisement
