Installing The Cooling Fan Assembly - Dell EMC PowerEdge R740 Installation And Service Manual

Figure 34. Removing the cooling fan assembly
Next step
Install the cooling fan assembly.

Installing the cooling fan assembly

Prerequisite
Follow the safety guidelines listed in
CAUTION: Ensure that the cables inside the system are correctly installed and retained by the cable retention bracket before
installing the cooling fan assembly. Incorrectly installed cables may get damaged.
Steps
1 Align the guide rails on the cooling fan assembly with the standoffs on the system.
2 Lower the cooling fan assembly into the system until the cooling fan connectors engage with the connectors on the system board.
3 Press the release levers to lock the cooling fan assembly into the system.
Safety instructions.
Installing and removing system components 81