Reference Information; Mounting The Encoder; Tabletop Use; Mounting Kits - Extron electronics NAV E 511 User Manual

Reference
Information

Mounting the Encoder

ATTENTION:
The 1-inch high, half-rack width encoder can be placed on a table, mounted in a rack, or
mounted under a desk or table.

Tabletop Use

Affix the included rubber feet to the bottom of the unit and place it in any convenient location.

Mounting kits

Mount the unit using any optional compatible mounting kit listed on the Extron website
(www.extron.com), in accordance with the directions included with the kit.
ATTENTION:
For rack mounting, see
• Installation and service must be performed by authorized personnel only.
• L'installation et l'entretien doivent être effectués par le personnel autorisé uniquement.
• When mounting the encoder under furniture, mount the device upside-down to
ensure proper ventilation.
•
Si vous installez le encoder sous un mobilier, veillez à installer l'unité à l'envers pour
assurer une bonne ventilation.
UL Rack-Mounting Guidelines on page 79.
NAV E 511 Encoder • Reference Information 78