Reference
Information
Mounting the Encoder
ATTENTION:
The 1U high, half rack width encoder can be placed on a table, mounted in a rack, or
mounted under a desk or table.
Tabletop Use
Affix the included rubber feet to the bottom of the unit and place it in any convenient location.
Mounting kits
Mount the unit using any optional compatible mounting kit listed on the Extron website
(www.extron.com), in accordance with the directions included with the kit.
For rack mounting, see
•
Installation and service must be performed by authorized personnel only.
•
L'installation et l'entretien doivent être effectués par le personnel autorisé uniquement.
UL Rack-Mounting Guidelines
on page 69.
NAV E 101 DTP Encoder • Reference Information
68