Audio Configuration (Audio Models Only); Memory Preset - Extron electronics DVS 304 Series User Manual

Audio Configuration (Audio Models Only)

Audio Configuration allows the input level to be adjusted between –15 dB to +9 dB for
each audio input.
(audio models only)
Figure 15.
Overall volume control is available through SIS commands or IR remote control.

Memory Preset

The memory preset feature saves the current values for image parameters such as color,
tint, contrast, brightness, detail, aspect ratio, horizontal start, vertical start, horizontal
active, vertical active, phase, total pixels, horizontal position, vertical position, horizontal
size, vertical size, and zoom.
The following flowchart provides an overview of the
options for each setting.
(Audio models only)
NOTE: The presets will only save the sizing, centering, and picture control information.
Memory Preset
Phase
Zoom
H/V Size
Color/Tint
Figure 16.
OUTPUT
CONFIG
MENU
IN1 LEVEL
AUDIO
NEXT
0dB
CONFIG
Input level
Adjust the input
gain/attenuation from
-15dB to +9dB of the
selected input.
Audio Configuration Menu
AUDIO
CONFIG
MENU
IN1 SAVE
MEMORY
NEXT
<N/A> 1 2 3
PRESETS
Saving (SAVE) memory presets
• Save the currently selected input's
picture control information.
• Up to 3 presets per input can be
selected < > and saved.
N/A is the default.
• Save a preset by pressing the NEXT
button.
3 per input
Aspect ratio
Total pixels
Bright/Cont
Memory Preset Options
NEXT
Memory Preset
IN1 CLEAR
NEXT
<N/A> 1 2 3
Clearing (CLR) memory presets
• Clear the currently selected input's
saved preset.
• Up to 3 presets per input can be
selected < > and cleared. N/A is
the default.
• Clear a preset by pressing the
NEXT button.
(12 total)
Film mode H/V Start
H/V Active H/V Pan
Detail H/V Position
DVS 304 Series • Operation
submenus and the
NEXT
16