Tcp/Ip Panel - Extron electronics IN1804 Series User Manual

3. Finalize the settings in one of the following ways:
Click the
•
Discovery
Click the
•
selected device. A new device configuration tab opens.
Click the
•
Discovery

TCP/IP Panel

The
TCP/IP
Figure 35.
1. Click the
2. In the
3. If required, enter the device password in the
NOTE: Select the
characters.
4. In the
5. Click the
button to accept the changes and return to the
Apply
panel.
Apply and Connect
button to cancel any pending changes and return to the
Cancel
panel.
panel connects PCS to a specific device through Ethernet.
TCP/IP Panel
tab (see figure 35,
TCP/IP
field ( ), enter the IP address of the desired device.
IP Address 2
Show Characters
field ( ), enter the Telnet port of the desired device.
Telnet Port 4
button ( ). A new device tab opens.
6
Connect
IN1804 Scaling Presentation Switcher • Configuration Software
button to accept the changes and connect to the
).
1
field (
Password 3
checkbox ( ) to display the password
5
Device
Device
).
83