TCP/IP Panel
The TCP/IP panel connects PCS to a specific device through Ethernet.
Figure 29.
1.
Click the TCP/IP tab (see figure 29,
2.
In the IP Address field (
3.
If required, enter the device password in the Password field (
NOTES:
•
•
4.
In the Telnet Port field (
5.
Click the Connect button (
TCP/IP Panel
1
), enter the IP address of the desired device.
2
The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of an absolute system
reset, these passwords convert to the default, which is no password.
Passwords are case sensitive.
Select the Show Characters checkbox (
characters.
), enter the Telnet port of the desired device.
4
). A new device tab opens.
6
DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control
).
).
3
) to display the password
5
64