Lennox Prodigy 2.0 Application Manual page 91

Note: Available menu options are dependent on hardware configuration.
Level 1 Level 2
TEST
REPLACE
SERVICE
REPORT
Table 59. Menu Interface (Level 1 - SERVICE)
Use the Adjust and set values
Level 3 arrows to scroll up or down for
selection options.
OPTIONS ARE COOL 1, COOL
COOL
2, COOL 3 AND COOL 4.
OPTIONS ARE HEAT 1, HEAT
HEAT
2, HEAT 3 AND HEAT 4.
BLOWER ON
BLOWER
BLOWER TEST AIRFLOW: NO = XX %
POSITION
DAMPER
POWER EXHAUST
OPTIONS ARE FAN 1, 2, 3, 4,
FANS
5 OR 6
OPTIONS ARE
DEHUMIDIFIER DEHUMIDIFIER 1 AND
DEHUMIDIFIER 2
OUTPUTS SERVICE RELAY
FILTER RESET RUNTIME? = NO OR YES
BELT
RESET RUNTIME? = NO OR YES
(only available based
on model number)
UV LAMP RESET RUNTIME? = NO OR YES OR NOT APPLICABLE EQUIPMENT NOT PRESENT
FANS (1 through 6) RESET RUNTIME? = NO OR YES OR NOT APPLICABLE EQUIPMENT NOT PRESENT
BLOWER RESET RUNTIME? = NO OR YES
COMPRESSOR (1
RESET RUNTIME? = NO OR YES OR NOT APPLICABLE EQUIPMENT NOT PRESENT
through 4)
USB SERVICE REPORT = DEFAULT VALVE IS THE SERIAL NUMBER IF SET. OTHER­
USB SERVICE
WISE IT WILL BE 123456789. CAN BE RENAMED BY USER. MAXIMUM 18 CHARAC­
REPORT
TERS.
USB ADVANCED AIRFLOW
USB ADV AIRFLOW REPORT = START USB RE­
RPT
PORT OR USB REPORT
DONE.
SAVE USER
SAVE USER PROFILE = YES OR NO
PROFILE
LOAD USER
LOAD USER PROFILE = YES OR NO
PROFILE
USB PROFILE SAVE = 1234 UNLESS CATALOG NUMBER IS SET. DEFAULT IS CATA­
USB PROFILE SAVE
LOG NUMBER. CAN BE RENAMED BY USER. MAXIMUM 18 CHARACTERS.
USB PROFILE LOAD =
1234XXXXXXXXXXX (USER
USB PROFILE LOAD ASSIGNED NAME AS SPE­
CIFICED. TYPICALLY CATA­
LOG NUMBER.
LOAD FACTORY
LOAD FACTORY PROF = YES OR NO
PROF
LOG SERVICE
LOG SERVICE EVENT = YES OR NO
EVENT
WHEN SELECTED (PRESS BACK TO RETURN TO
THE PREVIOUS MENU)
COOL X ON
RAT: XX.X F
DAT: XX.X F
OR
NOT APPLICABLE EQUIPMENT NOT PRESENT
HEAT X ON
RAT: XX.X F
DAT: XX.X F
OR
NOT APPLICABLE EQUIPMENT NOT PRESENT
ACTUAL: 0.1%.
NOTE: THIS FUNCTION IS ONLY AVAILABLE IF CON­
FIGURATION ID 1, POSITION 2 HAS BEEN CON­
FIGURED.
POWER EXHAUST ON OR NOT PRESENT
FAN X ON OR NOT APPLICABLE EQUIPMENT NOT
PRESENT
WHEN SELECTING OPTION, RESPONSE WILL BE
EITHER DEHUMIDIFIER X ON OR NOT APPLICABLE
EQUIPMENT NOT PRESENT.
SERVICE RELAY ON
START USB REPORT = SAF_RPT (DEFAULT) AND
CAN BE RENAMED BY USER. MAXIMUM 18 CHAR­
ACTERS.
WILL LOAD PREVIOUSLY SAVED USB PROFILE.
Page 92