Lennox Prodigy 2.0 Application Manual page 87

Menu Interface Details
The following tables indicate the major levels of the menu interface. Many of these options have more levels which are
described in the following sections that detail DATA, SETUP, SERVICE, and SETTINGS.
Use the SELECT button to progress to the next menu level (i.e. level 1 to level 2).
Use the SCROLL arrows ▲▼ to move (scroll) within a menu level.
Use the BACK button to return to the previous menu level.
Use the Adjust and set value arrows ▲▼ to change values of selected item.
Level 2 Level 3
ALARMS
CLEAR ALARM HISTORY = NO OR YES
HISTORY
LAST SERVICE (TIME STAMP OF LAST SERVICE)
SENSORS
IN/OUPUTS
OUTPUTS
(NOTE: COMPONENTS ARE ONLY
DISPLAYED IF INSTALLED.)
SOFTWARE VERSION
RTU DESCRIPTION
CATALOG NUMBER
FACTORY
MODEL NUMBER
SERIAL NUMBER
CONFIGURATION ID 1
CONFIGURATION ID 2
BACNET
NETWORK
LONTALK
L-CONNECTION
Table 57. Menu Interface (Level 1 - DATA)
Level 4
THERMOSTAT
BLOWER SPEED: X
OAT: XX F
RAT: XX F
DAT: XX F
ZAT (A2): XX F
C02: XX PPM
RH: XX %
IE
OE
GLO: ON/OFF
OCP: ON/OFF
SMOKE: ON/OFF
D12: ON/OFF
D13: ON/OFF
REHEAT D14: ON/OFF
COMPRESSOR 1: ON/OFF
COMPRESSOR 2: ON/OFF
BLOWER: ON/OFF
EXHAUST: ON/OFF
FAN 1: ON/OFF
FAN 2: ON/OFF
HEAT 1: ON/OFF
HEAT 2: ON/OFF
REHEAT COIL 1: ON/OFF
REHEAT COIL 2: ON/OFF
SERVICE RELAY: ON/OFF
LCD HEATER: ON/OFF
MAC ADDRESS: XXX
BAUD RATE: XXXXX
DEVICE INSTANCE: X
PROGRAM ID
NEURON ID
LCONN ADDRESS: X
Page 88
Level 5
G: ON/OFF
W1: ON/OFF
W2: ON/OFF
Y1: ON/OFF
Y2: ON/OFF