2.3.2 Uninstall the Echo software
If you need to uninstall the Echo software, use the following procedure:
1. Click the S
button on the Windows Taskbar.
TART
2. Point to S
ETTINGS
3. Double-click A
DD OR
4. Select Echo liquid handler and click R
2.3.3 Upgrade the Echo software
Upgrading the software requires a new Echo software CD. Contact Labcyte
Service and Support for the most current version.
information" on page 7-1.
Depending on your current software version, you may need to run a clean
installation. Check with Labcyte Service and Support to determine if your
software can be upgraded. If not, you will need to perform a new (or clean)
installation. Back up your existing liquid transfer and plate definition data.
1. Insert the new Echo liquid handler software CD on the client PC.
2. Follow the installation instructions.
page
2-7.
and select C
ONTROL
R
P
EMOVE
ROGRAMS
See "Install the software" on
P
.
ANEL
.
.
EMOVE
See "Contact
Installation and Relocation 2-9