384-Plate To 384-Plate Liquid Transfer - Labcyte Echo 520 User Manual

Examples of these protocols are described later in this section.
Additional and more complex fluid transfer protocols can be defined with
the Echo Applications software packages (Echo Plate Reformat, Echo
Cherry Pick, Echo Dose-Response, and Echo Array Maker), as well as with
the extensive ActiveX control library defined in the Echo Software
Development Kit (Echo SDK). These protocols can specify virtually any
combination of transfers from source microplate wells to destination wells
and slides. Refer to the Echo Application manuals and Echo Integration
Guide for more information.

1.3.1 384-plate to 384-plate liquid transfer

Figure 1.7 and Figure 1.8 below illustrate simple fluid transfers between
two 384-well microplates. While Figure 1.7 shows a full-plate transfer,
Figure 1.8 shows a multi-region, partial plate transfer. Both transfer
protocols are easily defined by the operator using the Echo liquid handler
software.
Figure 1.7 384 to 384 full plate transfer
A1 A1
Figure 1.8 384 to 384 multi-region, partial plate transfer.
A1 A1
Introduction 1-13