Labcyte Echo 520 User Manual page 141

Figure 5.37 Diagnostic survey plate parameters
8. After the survey, the following options are available in the V
below the S
TATISTICS
depending on the application.
Result:
Volume: Displays fluid volume.

Fluid Composition:

type described in the Fluid box. In the previous figure, the fluid
composition is in MRayl. Fluid Thickness:
thickness.
Post Processing:
Raw: The measured fluid percentages are not "processed."

Processed (homogeneous)

"processed" using a moving average filter.
Processed (inhomogeneous)

are "processed" to reduce measurement noise
Note: Selecting processed or raw
following data:
 The data displayed in the plate map.
 The data displayed in the Statistics section.
 The data saved to a CSV file on the client PC.
* The Echo 520 liquid handler does not report this result.
† Not available in Echo software version 2.2 and later.
section. Select the appropriate survey type
*
Displays fluid composition based on the fluid
†
: The measured fluid percentages are
†
: The measured fluid percentages
percentages affects the
fluid
IEW
*
Displays well fluid
Echo Liquid Handler Software 5-41
section