Labcyte Echo 520 User Manual page 124

Manage labware specifications
Adding a new destination plate, or editing an existing destination plate, are
virtually the same process. On the L
The D
Figure 5.26 Plate Specification for Destination Plate
Plate Name: Enter a plate name to identify the new specification
(required).
Manufacturer: Enter the manufacturer's name.
Lot Number: Enter the plate lot number identification.
Part Number: Enter the manufacturer's plate part number.
Rows: Enter the number of rows.
The valid range is one or more.
Columns: Enter the number of columns.
The valid range is one or more.
5-24 Echo Liquid Handler User Manual
P S
ESTINATION LATE
Note: The edit window for the source plate specification looks the
same, but only the barcode location can be edited.
tab click either A
ABWARE
dialog box will open.
PECIFICATION
or E .
DD DIT