Chapter 5 Echo Liquid Handler Software - Labcyte Echo 520 User Manual

The Labcyte Echo liquid handler comes with user software. The Echo liquid
handler software (referred to as the "Echo software" from this point on)
provides a Windows-based graphical user interface (GUI). The user can
control the Echo liquid handler and execute most of its functions, which
include the following:
 Protocols window: defines new liquid transfer protocols and edit or
delete existing protocols; run the protocols.
 Labware window: defines new destination plates, and edit or delete
existing destination plate definitions.
 Diagnostics window: monitors Echo liquid handler status; directly
control most of the Echo liquid handler motor function and perform
diagnostic procedures.
 Calibration window: performs calibration procedures.
 Advanced window: changes transfer options; reset or shut down the
Echo controller.
 Status window: monitors Echo liquid handler functions.
E L
CHO IQUID
C 0
HAPTER
5
C
H A P T E R
H
ANDLER
S
OFTWARE
Echo Liquid Handler Software 5-1