Labcyte Echo 520 User Manual page 110

3. Click the N
dialog box.
Figure 5.11 Add new protocol wizard page 3 of 3
You must define a fluid transfer map for each of the source microplates
used.
4. Click the V
source plate. The Define Wells dialog box shows the wells that are
available for transfer. Select the wells you want to include in the
transfer. Repeat this step for the other source plates and click the OK
button.
Figure 5.12 Define wells in a transfer map
For an explanation on how to select wells in a transfer map, see
a transfer map" on page
5. Click the F
5-10 Echo Liquid Handler User Manual
button to open the third A
EXT
/D button to create a transfer map for the first
IEW EFINE
5-14.
button after all four transfer maps have been created.
INISH
N P W
DD EW ROTOCOL IZARD
"Create