Additional Components - Labcyte Echo 520 User Manual

2.1.2 Additional components

The following components are needed to work with the Echo liquid
handler:




2-4 Echo Liquid Handler User Manual
Chiller for maintaining a constant fluid temperature. Included with
the Echo system. See "Chiller Information" on page C-1
information.
Distilled water for filling the chiller well, coupling fluid bottle, and
coupling fluid circuit.
Caution: Do not use de-ionized water, as it may corrode the fluidics
system.
Client PC (customer's computer) running the Echo software to
monitor and control the Echo liquid handler. The PC should have an
®
Intel Core™ 2 Duo processor or equivalent with Windows XP
Professional (SP3 or later); 1GB of RAM, minimum; 1 GB of available
disk storage; video resolution of 1280 x 1024; and a 10/100/1000
baseT Ethernet port.
Note: If you are integrating the Echo liquid handler into an
automated HTS (High Throughput Screening) system and need to
install the Client + Server software onto a workstation, it must
contain an Intel Core™ 2 Duo processor or better.
Network IP address: A static IP address must be allocated for the
Echo liquid handler. If you cannot use the preconfigured IP address
(192.168.1.1) in your network, or if you are installing more than one
Echo liquid handler, use the Echo Admin Client (included on the Echo
Server 2.4 disk) to change the IP address on the client PC.
for more