Advanced Echo Control - Labcyte Echo 520 User Manual

Cancel: Clicking the C
with no action taken.

5.5.3 Advanced Echo control

There are cases when the Echo controller must be shutdown or restarted.
The Echo controller is the hardware and software resident on the Echo
instrument that controls all functions of the instrument.
Figure 5.51 Echo controller restart or shutdown
Caution: If the Echo software is connected to a stub mode Echo
liquid handler service running on the client PC, clicking the H
R button will "reset" the client PC, and clicking the S
ESET
button will "shutdown" the client PC.
Soft Reset: Clicking the S
restarted on the Echo controller.
Hard Reset: Clicking the H
reboot. After rebooting the Echo controller, any attached client computer
programs must be reconnected to the Echo controller.
Shutdown: Clicking the S
perform its normal "shutdown" procedure. If an Echo liquid handler needs
to be turned off, its controller should always be "shutdown" before the
Echo AC power switch is turned off.
button closes the Solvent Platemap dialog box
ANCEL
R button causes the Echo service to be
OFT ESET
R button causes the Echo controller to
ARD ESET
button causes the Echo controller to
HUTDOWN
HUTDOWN
Echo Liquid Handler Software 5-57
ARD