Labcyte Echo 520 User Manual page 156

Define: Clicking the D
button opens the Solvent
Platemap dialog box.
Use predefined: When the U
liquid handler will use the predefined DMSO concentration map.
Predefining a solvent concentration map
Place the cursor in any individual cell of the plate concentration map and
enter the DMSO concentration for that well. For example, if the fluid
contains 72.5% DMSO, enter 72.5.
Figure 5.50 Solvent platemap
Solvent Concentration Percentage: Enter a DMSO concentration in
preparation for clicking the F
Plate Type: Select the source microplate type.
Fill: Clicking the F
percentage into each cell of the solvent concentration map.
File. A predefined solvent platemap file in CSV format
can be loaded by clicking F
solvent platemap file in CSV format can be saved by
clicking F
Ok: Clicking the OK button closes the Solvent
Platemap dialog box and accepts the solvent
concentrations entered.
5-56 Echo Liquid Handler User Manual
EFINE
Note: Use this function carefully and only when you need to specify a
fixed measurement and override the Echo DMSO measurement. An
incorrect DMSO concentration will produce questionable or
unexpected results.
button loads the entered DMSO concentration
ILL
| S
ILE AVE .
P checkbox is selected, the Echo
SE REDEFINED
button.
ILL
| L
ILE OAD . A predefined