Labcyte Echo 520 User Manual page 142

The source microplate survey data is displayed in the main data grid of the
S
URVEY
will be displayed, depending on which R
data will either be raw, processed (homogeneous), or processed
(inhomogeneous) depending on which P
selected.
In the S
maximum, average, and CV data from the
survey is reported. These statistics are
calculated from raw, processed
(homogeneous), or processed
(inhomogeneous) survey data depending on
which P
In the R
This information is used only by Labcyte personnel during troubleshooting
or system analysis.
Figure 5.38 Diagnostic survey results
9. To save the survey data to the client
PC, click the F
from the following choices:



5-42 Echo Liquid Handler User Manual
dialog box. Either fluid composition or well fluid thickness (height)
section, the minimum,
TATISTICS
P radio button is selected.
OST ROCESSING
section, raw data collected during the survey is displayed.
ESULTS
button and select
ILE
S | F C
AVE LUID OMPOSITION
S | F T
AVE LUID HICKNESS
S | R (. ).
AVE AW CSV
radio button is selected. The
ESULT
P
OST ROCESSING
(. ).
CSV
(. ).
CSV
radio button is