Labcyte Echo 520 User Manual page 114

b. Select the wells you want to include in the transfer. For an
c. Click the radio button for Dest 2 and select the wells you want to
6. Click the F
Create a transfer map
A transfer map must be created for each source microplate. The transfer
map defines which source microplate wells contain compound that will be
transferred to the destination plate.
When you click the V
opens.
Figure 5.19 The Define Wells dialog box
The D
microplate. Each source microplate well is represented by a grid square.
The user selects the microplate wells from which fluid will be transferred.
Selected wells (highlighted in blue) will be transferred when the protocol is
run. The dialog box shown above defines a liquid transfer from wells A1
5-14 Echo Liquid Handler User Manual
explanation on how to select wells in a transfer map, see
transfer map" on page 5-14.
include in the transfer. Repeat this process for the remaining
destination plates.
Note: If you are selecting the same group of source wells for all four
destination wells, then click the radio button for All and select the
wells you want to include in the transfer. The software will
automatically create the transfer maps for Dest 1 to Dest 4.
button after all four transfer maps have been created.
INISH
/D
IEW
W dialog box shows a simple grid that represents the
EFINE ELLS
button, the D
EFINE EFINE
"Create a
W dialog box
ELLS