1.2.3 Ease of use
An Echo liquid handler is quickly ready for use.
Minimal operator training is required.
User calibration or recalibration are not required.
Preparation for liquid transfers requires little more than defining a
transfer protocol and selecting the source and destination plates
being used.
Protocols or destination plates can be quickly defined by the operator.
Liquid transfer requires only a few "clicks" by the operator, using the
software, which is included with each instrument.
The Echo liquid handler can be operated manually by a researcher or
as part of a fully automated drug discovery lab.
For example, Figure 1.4 demonstrates the simple, two-step process
required to run an existing fluid transfer protocol using the software
program.
Figure 1.4 Executing a transfer protocol in two steps.
Select a protocol
Run the protocol
Introduction 1-7