Labcyte Echo 520 User Manual page 149

Figure 5.45 Calibrate Power dialog box after power calibration
3. System Gain: During normal operation, the S
not be changed by the user. However, the user can override the
automated power calibration by adjusting the S
multiplier value. The default S
O checkbox and enter a multiplier value manually.
VERRIDE
4. After power calibration has been performed and/or the S
parameter has been modified, there are three actions to choose from.
OK: The OK button applies the new A
the new System Gain value and closes the C
Change confirmation is not requested.
Apply: The A
PPLY
of the A
MPLIFIER
Y applies the changes. Answering N
ES
box without applying the change(s) and returns to the C
dialog box.
Cancel: The C
ANCEL
without taking any further action.
YSTEM
button displays a dialog box asking for confirmation
F and/or S
EEDBACK YSTEM
button closes the C
G
YSTEM AIN
G
YSTEM
G value is 1.0. Select the
AIN
F
MPLIFIER EEDBACK
P
ALIBRATE OWER
G change(s). Answering
AIN
closes the confirmation dialog
O
ALIBRATE
P
ALIBRATE OWER
Echo Liquid Handler Software 5-49
value should
scalar
AIN
G
YSTEM AIN
value and/or
dialog box.
P
OWER
dialog box