Status Indicators - Labcyte Echo 520 User Manual

5.3.2 Status indicators

The S S
YSTEM TATUS
array of status indicators and readouts. Four of them (P
F , and EMO) correspond to the similarly named indicators on the Echo
AULT
status panels.
Figure 5.33 System status section
Power indicator
The P status indicator provides more information than simply power
OWER
on or power off.
Green: The Echo liquid handler is powered on and is ready for use.
Gray: One or more of the following conditions is true:
 The Echo liquid handler is not powered on.
 The Echo internal controller is not running.
 The Echo liquid handler is still initializing after being powered on and
is not yet ready for use.
Warning indicator
The W status indicator reports conditions that will not allow normal
ARNING
operation.
Gray: OK. The Echo liquid handler is ready for use.
Yellow: One or more of the following is true:
 The Echo stages are not homed.
page 5-45.
 The coupling fluid bottle level is low.
on page 5-35.The process door is neither fully open nor fully closed.
 The upper anti-static bar is neither fully up nor fully down.
 The source plate dryer nozzle is neither fully up nor fully down.
 Focus calibration is required.
section of the D
IAGNOSTICS
See "Home calibration" on
window contains a vertical
, W
OWER
See "Coupling fluid indicator"
Echo Liquid Handler Software 5-33
,
ARNING