Table of Contents
Advertisement
AMI Phosphate-II
Product Description
2.1.
Power Supply
Sample
requirements
On-site
requirements
Electronics
housing
12
Instrument Specification
Voltage:
Power consumption:
Flow rate:
Sample pressure inlet:
Temperature:
ATTENTION
No oil, no grease, no sand.
The analyzer site must permit connections to:
Sample inlet:
2 Drains:
(1/2") hose nozzle which must end in convenient atmospheric
waste of sufficient capacity.
Aluminum
with a protection degree of IP 66 / NEMA 4X
Ambient temperature:
Limit range of operation: -25 to +65 °C
Storage and transport:
Humidity.:
Display:
100–240 VAC (± 10%)
50/60 Hz (± 5%)
or 24 VDC, isolated, (± 15%)
max. 20 VA
min. 10 l/h
0.15–2 bar (2–28 PSI)
5–50 °C (41–122 °F)
Tube 4 x 6 mm
each 15 x 20 mm
-10 to +50 °C
-30 to +85 °C
10 to 90 % relative non condensing
backlit LCD, 75 mm x 45 mm
A-96.250.641 / 290312
Advertisement
Table of Contents
