Table of Contents
Advertisement
AMI Phosphate-II
Product Description
2.1.
Power Supply
Transmitter
specifications
Sample
requirements
On-site
requirements
A-96.250.641 / 290121
Instrument Specification
AC variant:
DC variant
Power consumption:
Housing:
Ambient temperature:
Storage and transport:
Humidity:
Display:
Flow rate:
Sample pressure inlet:
Temperature:
CAUTION
Impairment of measurement accuracy
The accuracy of the instrument may be impaired by contamina-
tion of the sample.
make sure that the sample does not contain any oil, grease or
sand.
The analyzer site must permit connections to:
Sample inlet:
Sample outlet:
100–240 VAC (± 10%)
50/60 Hz (± 5%)
10–36 VDC
max. 35 VA
aluminum, with a protection degree of
IP 66 / NEMA 4X
−10 to +50 °C
−30 to +85 °C
10–90% rel., non condensing
backlit LCD, 75 x 45 mm
min. 10 l/h
0.15–2 bar (2–28 PSI)
up to 50 °C (122 °F)
Tube 6 x 8 mm
2 Drains, 1/2" hose nozzle for flexible
tube diam. 20x15 mm which must end in
convenient atmospheric waste of suffi-
cient capacity.
13
Advertisement
Table of Contents
