Swann AMI Phosphate-II Operator's Manual page 44

AMI Phosphate-II
Maintenance
General
Reagent 1
Reagent 2
42
WARNING
Read the warnings for each chemical carefully.Observe the
necessary security measures when handling dangerous chemi-
cals. Wear suitable protective clothing, gloves and eye/face pro-
tection. In case of accident or if you feel unwell, seek medical
advice immediately (show the label where possible).
Read the material safety data sheets.
Reagent 1: Sulfuric acid 96%
 H290 Corrosive to metals.
 H314 Skin corrosion, Category 1A.
If in contact with skin: Rinse with plenty of water.
In case of contact with eyes, rinse open eye immediately with
plenty of water and seek medical advice.
Ammonium heptamolydate
 Not a dangerous substance according to GHS.
Reagent 2: Potassium antimonyl (III) oxide tartrate
 H302 Harmful if swallowed.
 H332 Harmful if inhaled.
 H411 Toxic to aquatic life with long lasting effects.
Ascorbic acid
 Not a dangerous substance according to GHS
See material safety data sheets:
agent 1, S. 82 and
Fill the containers with 2 liters of demineralized water. Add the pre-
scribed reagents and mix to complete dissolution.
First dissolve content of one bucket reagent 1. Only then measure
100 ml sulfuric acid and add carefully while gently mixing.
Dissolve content of one bucket reagent 2. Some foam forms on the
surface, this is normal and does not disturb the measurement
OXYCON ON-LINE phosphate re-
OXYCON ON-LINE phosphate reagent 2, S. 86
A-96.250.641 / 290312