Set Default; Load Firmware; Sample Id - Swann AMI Phosphate-II Operator's Manual

Version 5.01 and higher

Hide thumbs Also See for AMI Phosphate-II:

Table of Contents

AMI Phosphate-II

Program List and Explanations

5.4 Miscellaneous

5.4.1

5.4.2

5.4.3

5.4.4

5.4.5

Language: Set the desired language.

Available settings: German / English / French / Spanish / Italian

Set defaults: Reset the instrument to factory default values in three

different ways:

 Calibration: Sets calibration values back to default. All oth-

er values are kept in memory.

 In parts: Communication parameters are kept in memory.

All other values are set back to default values.

 Completely: Sets back all values including communication

parameters.

Load Firmware: Firmware updates should be done by instructed

service personnel only.

Password: Select a password different from 0000 to prevent unau-

thorized access to the menus "Messages", "Maintenance", "Opera-

tion" and "Installation".

Each menu may be protected by a different password.

If you forgot the passwords, contact the closest SWAN representa-

tive.

Sample ID: Identify the process value with any meaning full text,

such as KKS number.

A-96.250.641 / 290312

Table of Contents