AMI Phosphate-II
Product Description
Alarm Relay
Input
Safety
Features
Communica-
tion Interface
(optional)
nd
2
Sample
Stream
Cleaning
Module
A-96.250.641 / 290312
One potential free contact.
Alternatively:
Open during normal operation, closed on error and loss of
power.
Closed during normal operation, open on error and loss of
power.
Summary alarm indication for programmable alarm values
and instrument faults.
One potential-free contact to freeze the measuring value or to inter-
rupt control in automated installations (hold function or remote-off).
The potential-free contact is located:
at the AMI Phosphate-II in the AMI Transmitter
at the AMI Phosphate-II B in the peristaltic pump
No data loss after power failure. All data is saved in non-volatile
memory. Over voltage protection of in- and outputs.Galvanic sepa-
ration of measuring inputs and signal outputs.The analyzer is facto-
ry tested and ready for installation and operation.
RS232 for logger download with HyperTerminal or RS485 with
Fieldbus protocol Modbus or Profibus DP. Webserver connection
via Modbus.
AMI Phosphate-II B
As an option an inlet for two sample streams with a sample switch-
ing valve can be installed onto the panel of the AMI Phosphate-II B
AMI Phosphate-II
As an option a cleaning module is available which can be connect-
ed to the AMI Phosphate-II.
WARNING
The drain of the photometer outlet contains Hexammonium
heptamolybdate 4-hydrate.
At no means recirculate it into the water system.
9