Restrictions For Use - Swann AMI Phosphate-II Operator's Manual

Version 5.01 and higher

Hide thumbs Also See for AMI Phosphate-II:

Table of Contents

AMI Phosphate-II

Safety Instructions

1.3.

A-96.250.641 / 290312

Restrictions for use

The sample must not contain any particles, which may block the

flow cell. Sufficient sample flow is coercive for the correct function

of the instrument.

If the sample contains only little disinfectant concentrations, or

there is the danger of biological growth, we recommend to use the

optional Cleaning module from Swan which is available as an op-

tion for the AMI Phosphate-II.

WARNING

For safe instrument installation and operation you must read

and understand the instructions in this manual, as well as the

Material Safety Data Sheets (MSDS)

 Oxycon On-line Phosphate 1

 Oxycon On-line Phosphate 2

ATTENTION

Never loosen pump tubes when flow is on. Otherwise you pol-

lute the reagents.

Table of Contents