Subaru Legacy 2005 Service Manual page 3790

ENTERTAINMENT
13.Noise Suppressor
A: REMOVAL
1. SEDAN MODEL
1) Disconnect the ground cable from battery.
2) Remove the rear quarter trim. <Ref. to EI-63,
SEDAN MODEL (MODEL WITH CURTAIN AIR-
BAG), REMOVAL, Rear Quarter Trim.>
3) Remove the curtain airbag module. <Ref. to AB-
20, REMOVAL, Curtain Airbag Module.>
4) Disconnect the harness connector from noise
suppressor.
5) Remove the harness clip.
6) Remove the screws and remove noise suppres-
sor.
2. WAGON MODEL
1) Disconnect the ground cable from battery.
2) Remove the rear gate trim. <Ref. to EI-69, RE-
MOVAL, Rear Gate Trim.>
3) Disconnect the harness connector from noise
suppressor.
4) Remove the screws and remove noise suppres-
sor.
B: INSTALLATION
Install in the reverse order of removal.
Noise Suppressor
ET-00092
ET-00093
ET-14