Table of Contents
Advertisement
AJ:DTC 85 LAP SEAT BELT PRETENSIONER FAILURE
DIAGNOSIS:
• Lap seat belt pretensioner (RH) circuit is shorted to power supply.
• Lap seat belt pretensioner is faulty.
• Lap seat belt pretensioner harness is faulty.
• Airbag control module is faulty.
CAUTION:
• Before diagnosing the airbag system, be sure to turn the ignition switch OFF, disconnect the
ground cable from battery, and wait more than 20 seconds before starting to work.
• When replacing the airbag module, seat belt pretensioner, roll connector, control module and sen-
sor, reconnect each part and check that the airbag warning light operates properly.
• When inspecting the airbag rear harness, disconnect the side airbag module connector, curtain
airbag module connector, seat belt pretensioner connector and lap seat belt pretensioner connector
for safety reasons.
WIRING DIAGRAM:
AB30
1 2
Diagnostic Chart with Trouble Code
AIRBAG CONTROL
AB18
MODULE
LAP SEAT BELT
PRETENSIONER
AB18
1 2
3 4
5 6
7 8 9 10 11 12
13 14 15 16 17 18 19
20
AB(diag)-107
AIRBAG SYSTEM (DIAGNOSTICS)
AB30
AB-01198
Advertisement
Chapters
Table of Contents
