Table of Contents
Advertisement
8) Install the pretensioner on a wheel with tire.
Then, bundle three automotive wire harness [each
with a sectional area of 1.25 mm
more], and bind them twofold around the preten-
sioner bracket and wheel.
9) Put three tires without wheel on the tire installed
with pretensioner. Put on an additional tire with a
wheel on top, and then fasten them tight with a
rope.
10) Move the battery at least 5 m (16 ft) from vehi-
cle, and secure the nearby area. Connect the de-
ployment tool alligator clip to the battery negative (−
) terminal.
(1) 5 m (16 ft) or more
Disposal of Pretensioner
2
(0.00194 sq in) or
SB-00028
SB-00025
SB-00065
SB-23
11) Connect the other cable of deployment tool to
the battery positive (+) terminal, and deploy the
pretensioner.
CAUTION:
• After deployment, the pretensioner is espe-
cially hot, leave it unattended for 40 minutes or
longer.
• Do not let water get in the deployed preten-
sioner.
12) Wrap the deployed pretensioner in airtight vinyl
bag to discard.
SEAT BELT SYSTEM
SB-00018
SB-00022
Advertisement
Chapters
Table of Contents
